Grizzly h8234 - Manual (Page 7)

Model H8234 28° Framing Nailer -5 -
introduction
If you have any comments regarding this
manual, please contact us:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
email: [email protected]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
e-Mail: [email protected]
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H8234 28° Framing Nailer. This model
is part of a growing Grizzly family of fine
pneumatic tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoyable
operation and proof of Grizzly’s commit-
ment to customer satisfaction.
The specifications, details, and photo-
graphs in this manual represent the Model
H8234 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
foreword contact info
tool data
Nail Size ...................... 1 ⁄
8
" Shank Diameter
Nail Strip Angle ............... 28º Clipped Head
Nail Length .......................................2"-3½"
Magazine Capacity .................. 2 x 25 Nails
Air Inlet ...........................................¼" NPT
Weight ............................................ 8
3 ⁄
4
lbs.
Operating Pressure .................. 80-110 PSI
Maximum Air Pressure .................. 120 PSI