Grizzly h8234 - Manual (Page 13)

Model H8234 28° Framing Nailer -11 -
A jammed nail must be cleared before
using the nailer again.
to clear a jammed nail from the dis-
charge area:
1. DISCONNeCT NAILeR FROM THe
AIR SUPPLY!
2. Pull back and latch the magazine push-
er.
3. Remove the nail stick from the maga-
zine.
4. Locate the opening in the underside of
the nailer safety nose (see figure 7).
clearing Jammed
nails
5. Dislodge the jammed nail with a tool
that will fit in the slot on the underside
of the nose.
6. Throw the damaged nail away and
insert a new nail stick that only contains
clean, undamaged nails. DO NOT use
dirty or damaged nails!
7. Release the catch lever and slowly
let the pusher slide to the front of the
magazine.
figure 7. Nose opening for clearing a
jammed nail.
Nose Opening