Grizzly G0528 - Manual (Page 25)

model g0528 (mfg. 5/04+)
-23-
3. raise the router bit to the desired height.
4. adjust the fence back and away from the bit
only enough to allow the ball bearing to con-
trol the depth of cut, as shown in
figures 24
& 25.
figure 24. proper setup for profile cutting
(top view).
figure 25. proper setup for profile cutting
(Side view).
5. adjust the fence as close as possible to the
bearing. the fence will serve as a back-up
support, reducing the chance of an accident.
ball bearing
ball bearing
router bit
Fence
router bit