Gefen GTV-HT-AUDPROC - Manual (Page 17)

13
OPERATING THE HOME THEATER AUDIO PROCESSOR
MAIN DISPLAY
The Main Screen will display useful information to the user. It displays the
currently selected input port and audio input format. The currently used output
format can also be displayed by pressing the ▼ button. Pressing the ◄ or ►
buttons while on this screen will have no effect. Please see below for the Main
Screen
layout.
2
3 4
1 This section will display the currently selected audio input source.
2 This section will display the current volume level. The range is from -60dB to
+10dB
3 The section will display the current input audio format. This unit will support
LPCM (2-6) channels) and Dolby Digital (AC-3 up to 6 channels).
4 This section will display the current processing mode. Supported modes are
Direct, Stereo, Multi Channel Stereo, Mono, and Dolby Pro Logic II.
1 - INPUT SOURCE
This portion of the screen will display the currently selected input. The available
inputs and their labels are listed below:
LCD Display
Name
Actual Input Location
HDMI HDMI In Rear Panel
SPDIF (default) Coax In Rear Panel
To switch between audio input sources, use the front panel button labeled INPUT.
The IR remote control has discrete switching functions. To select the source
connected to the “Coax In” port, press the SPDIF button. To select the source
connected to the “HDMI In” port, press the HDMI button.
2 - VOLUME INDICATOR
This portion of the screen will display the current volume level. Volume control is
based on reference levels. 0.0dB on this unit is approximately 85dB (reference
level for dialog recorded in studios) with peaks of up to 105dB.
The maximum volume setting is +10dB. The minimum volume level is -60dB.
The default value is -30dB.