Speaker distance, Operating the home theater audio processor – Gefen GTV-HT-AUDPROC User Manual
Page 21
17
•
Front R - These settings will affect the front right channel output (default is
+00dB).
•
Surr R - These settings will affect the surround right channel output (default
is +00dB).
•
Surr L - These settings will affect the surround left channel output (default is
+00dB).
•
Sub - These settings will affect the subwoofer channel output (default is
+00dB).
Use the ◄ and ► buttons on the front panel to change options for the selected
speaker.
When fi nished, press the ▼ or ▲ to move to another selection. Alternately, the
user can press the OK button to immediately cycle to the next option.
To return to the previous menu, press the EXIT button. To exit the entire Menu
System, press the MENU button.
SPEAKER DISTANCE
This menu option will allow the user to set the distance of each speaker. This
feature is necessary for providing the proper audio delay when using the various
processing modes.
The distance unit can be viewed in either feet or meters. This option is set in the
Miscellaneous Setup menu. The distance for each speaker can be set in 1.5 feet
(0.5 meter) increments between 0 feet (0 meters) to 33 feet (10 meters).
Use the ▼ and ▲ buttons on the front panel to select the desired speaker output.
The following selections are available:
•
Front L - These settings will affect the front left channel (default is 3.0m).
•
Center - These settings will affect the center channel (default is 2.0m).
•
Front R - These settings will affect the front right channel (default is 3.0m).
•
Surr R - These settings will affect the surround right channel (default is
2.0m).
•
Surr L - These settings will affect the surround left channel (default is 2.0m).
•
Sub - These settings will affect the subwoofer channel (default is 3.0m).
Use the ◄ and ► buttons on the front panel to change options for the selected
speaker.
When fi nished, press the ▼ or ▲ to move to another selection. Alternately, the
user can press the OK button to immediately cycle to the next option.
To return to the previous menu, press the EXIT button. To exit the entire Menu
System, press the MENU button.
OPERATING THE HOME THEATER AUDIO PROCESSOR