Grizzly G0492 - Manual (Page 17)

G0492 12" X 36" Combo Lathe/Mill
-15-
TURN OFF and LOCK your master power
switch so no power is available to the lathe/
mill, and make sure the spindle is stopped
before proceeding with any adjustments or
maintenance. Failure to comply may result
in serious personal injury or death.
When illuminated, the power lamp ( Figure 6)
indicates that power is being supplied to the lathe/
mill. Pressing the red emergency stop button will
cut power for machine operations. Twisting the
emergency stop button clockwise and letting it
pop out will restore power for machine operations
and reset the emergency stop button.
Note: The Spindle Rotation ON/OFF Lever
(
Figure 8) on the apron starts the spindle motor
in a particular direction.
Figure 6. Power lamp and emergency stop
location.
Emergency
Stop Button
Power Lamp
Spindle Jog
Button
Operation Safety
SECTION 4: LATHE OPERATIONS
The Power Supply
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Complete the Test Run & Break-In proce-
dure on Page 16 before using this lathe/mill
for any cutting or threading operations; oth-
erwise, gear box damage will occur.
NOTICE