Graco Inc. 111418a - Manual (Page 15)

Startup
310892F 15
Clearing Tip Clogs
1. Trigger gun and spray
test pattern. Slowly
adjust pressure to elimi-
nate heavy edges. Use
smaller tip size if pres-
sure adjustment can not
eliminate heavy edges. 2. Hold gun perpendicular,
10-12 in. (25-30 cm)
from surface. Spray back
and forth. Use strokes
overlapped by 50%.
Start gun movement
before triggering gun
and release trigger
before stopping gun
movement. 1. Release trigger, put trig-
ger safety ON. Rotate
SwitchTip. Take trigger
safety OFF and trigger
gun to clear the clog. 2. Put trigger safety ON,
return SwitchTip to origi-
nal position, take trigger
safety OFF and continue
spraying.
heavy
edges ti5823a
ti5824a ti5825a
ti10167a
ti10166a
ti4138a
ti5826a
ti10167a
ti10166a