Graco Inc. 111418a - Manual (Page 18)

Startup
18 310892F
WatchDog
™
Protection System
Pump stops automatically when material pail is empty. Change Display Units:
To Activate:
1.
Do Startup.
2. Turn WatchDog switch
ON and WD ON dis-
plays.
EMPTY displays /
flashes and the pump
stops when WatchDog
protection system
detects an empty mate-
rial pail.
3. Turn WatchDog switch
OFF. Add material or
reprime sprayer. Turn
pump switch OFF and
ON to reset WatchDog
protection system. Turn
WatchDog switch back
ON to continue to moni-
tor material level. Pressure/Volume:
Press and hold (8 seconds)
DTS button to change pres-
sure units (psi, bar, MPa), to
desired units. Volume units
(GAL, LTRx10) follow pres-
sure units; i.e., psi/GAL and
bar or MPa/LTRx10.
Continue to press DTS but-
ton to cycle from psi to bar to
MPa. Release DTS button to
select units.
WA
C T
H
D
O
G
/.
/&&
ti6207a
ti6224a
WA
C T
H
D
O
G
/.
/&&
ti6208a
PSI
BAR
-0A
PSI
SMARTCONTROL
ti6225a