Graco Inc. 111418a - Manual (Page 26)

Cleanup
26 310892F
Caution: If flushing with water, do
not leave water in sprayer. Flush
again with mineral spirits, oil or
Pump Armor and leave this protec-
tive coating in the sprayer to help
prevent freezing or corrosion and
increase sprayer life. 13. Close prime valve. Trig-
ger gun into flushing pail
to purge fluid from hose.
Open prime valve.
14. Install filter into fil-
ter bowl. Make
sure plastic center
tube is tightened
securely. Hand
tighten filter bowl.
Hand tighten gun
handle.
15. Clean tip, guard and
gasket with a soft bristle
brush to prevent part
failure due to dried
materials. Assemble
parts and attach loosely
onto gun.
Wipe sprayer, hose and
gun with a rag soaked in
water or mineral spirits.
Pump Armor
ti2895a
ti5973a
ti5979a
FLUSH
ti5963a
ti5840a
ti5984a
FLUSH
ti5843a