Gefen EXT-DVIRS232-1FO - Manual (Page 14)

11
DIP SWITCH CONFIGURATION
Receiver unit
DIP 1 - Not Used
• Reserved for future expansion.
DIP 2 - Not Used
• Reserved for future expansion.
DIP 3 - Calibration Mode
• OFF - Enables Calibration Mode
Enables Calibration Mode. Make sure to set DIP switch 3 on both the
Sender unit and Receiver unit when calibrating the Extenders.
• ON - Calibration Mode Lock
Locks the calibration settings. Set DIP switch 3 on both the Sender unit and
Receiver unit to the ON position after the calibration process has completed.