GE ZTD910 - Manual (Page 3)

3
Design Information
Warming Drawer
Models
Available ZTD910
30” Wide model
ZKD910
27” Wide model
Product
Dimensions
Dimension A
ZTD910 30”
ZKD910 26-3/4”
The warming drawers may be installed
directly into a wall or wall oven cabinetry,
or below a countertop.
Accessories ZXD27B, ZXD30B – This kit provides for the
installation of a custom front panel on 27"
and 30" black and white wide models.
NOTE: The original drawer front will be removed and discarded
when this kit is used. The tubular handle can be reinstalled onto
the custom panel with longer screws (not provided). Or, the
original handle can be replaced with a custom handle of your
choice. (Handle is not supplied.) Choose a custom handle to match
or complement cabinetry hardware.
Tools and
Materials
Required • Wood screws and adhesive or other hardware for installing
runners or shelf to support warmer drawer.
• 2 x 4 or 2 x 2 lumber for runners
• 2 x 4 or 2 x 2 wood block for anti-tip security
• Saw
• Level
• Drill and 1/16” bit
• Phillips screwdriver
Runners must be level, rigidly mounted and capable of supporting
150 pounds.
26"
Including
Handle
23-1/4"
A
10-1/2"
9"
1"
Drawer
Open
27"
JXPN2 – Warming drawer pan kit. This kit
includes supports and one full size and one
half size pan with lids. The pans fit 27" and
30" wide models.