Grizzly H7583 - Manual (Page 16)

-14-
H7583 Tenoning Jig
Damage to your eyes, lungs, and ears could
result from using this jig without proper
protective gear. Always wear safety glasses,
a respirator, and hearing protection when
operating machinery.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 3: OPERATIONS
NOTICE
If you have never used this type of jig
before, WE STRONGLY RECOMMEND that
you read books, trade magazines, or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Overview
Your new tenoning jig features three positive
stops that allow for fast and accurate positioning
of the back stop angle, work support angle, and
work support distance from the blade. This jig is
designed to make tenon cheek cuts only; howev-
er, you can make many special variations to the
basic tenon that is shown in
Figures 14 & 15.
Figure 14. Basic tenon.
Figure 15. Typical mortise and tenon.