Grizzly H7583 - Manual (Page 9)

H7583 Tenoning Jig
-7-
The Model H7583 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory the
contents.
Wear safety glasses dur-
ing the entire set up pro-
cess!
This jig presents seri-
ous injury hazards to
untrained users. Read
through this entire man-
ual to become familiar
with the controls and
operations before using
this jig!
Unpacking
Set Up Safety
SECTION 2: SET UP
Inventory
After all the parts have been removed from the
two boxes, you should have the following items:
Box 1: (Figure 1) Qty
A. Work Plate Assembly and Base ................. 1
B. Clamp Assembly ........................................ 1
C. Clamp Handle ............................................. 1
D. Clamp Arm ................................................. 1
E. Push Handles w/Flat Washer ..................... 2
Figure 1. Tenoning jig inventory.
A
C
B
D
E
Hardware and Tools Qty
• Lock Washer 10mm ................................... 2
• Fender Washer 8mm ................................. 1
• Cap Screw M8-1.25 x 50mm ..................... 1
• Cap Screw M10-1.5 x 25mm ..................... 1
• Cap Screw M10-1.5 x 20mm ..................... 1
• Hex Wrenches 2.5, 3, 4, 6, 8mm ..........1 Ea