Gefen EXT-DP-441 - Manual (Page 16)

13
OPERATING THE 4X1 DISPLAYPORT SWITCHER
Switching sources using RS-232
Confi gure the Switch for use with RS-232 (see page 14 for details).
Example: Switch to input 4 using RS-232
1 Use the command r 4 to route the Switcher to Input 4. See page 14 - 15
for important information on RS-232 commands. RS-232 commands are
case-sensitive.
2 The LED indicator for Input 4 will glow bright blue on the front panel.
Switching sources using Telnet
Confi gure the Switch for use with Telnet. See page 24 for details.
Example: Switch to Input 2 using the Telnet protocol
1 Use the command r 2 to route the Switcher to Input 2.
2 The LED indicator for Input 2 will glow bright blue.
2
terminal ready...
r 4
Route to Input 4
1
2
Type Cmd: r 2
Route to Input 2
1