Gefen EXT-DP-441 - Manual (Page 5)

READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 4X1 DISPLAYPORT SWITCHER
• The 4x1 DisplayPort Switcher supports Pass-through EDID. The Switcher
will use the EDID from the currently connected monitor.
• Dual Link resolutions up to 2560 x 1600 are supported.
• HDCP content is not supported.
• This Switcher does not support DHCP.
• The default IR channel for both the Switcher and the IR Remote Control Unit
is channel 0. See page 10 for more information.
OPERATION NOTES
2