GE ProBridge PBe - Manual (Page 17)

13
Figure 4. Laptop connected to PBe
4. The Connection Description dialog box will display.
Type in a name for this session (PBe) and click OK.
5. The Connect To dialog box display. Select the COM port
you are connected to in the Connect Using drop-down
list.
6. The COMx Properties dialog box will display. Select the
following settings to complete the HyperTerminal setup:
• Bits per second = 57600
• Data bits = 8
• Parity = none
• Stop bits = 1
• Flow control = none
7. Click OK.
To program the PBe do the following:
1. Power up the PBe by plugging in the power supply. The
window shown in Figure 5 will appear confirming that
you are in HyperTerminal programming mode.