GE ProBridge PBe - Manual (Page 15)

11
setting switches 5-8 on SW1. See SW1 switches 5 to 8 on
page 21.
2. Connect the PBe to the network switch or hub using the
supplied 4310-0040 Ethernet cable.
3. Connect the PBe to the DVR using the supplied 4310-
0034 cable. Plug one end into port 1 of the PBe and the
other end into the RS-232/2 port of the DVR.
4. Program the DVR for the desired recording functions
based upon the presence of transaction text. In addition,
make sure the RS-232/2 port is set for a 57600 baud rate.
See the DVR manual for more information.
5. Apply power to the PBe using the supplied power supply.