GE 25982xx3 - Manual (Page 25)

5
Corded Handset
1. Lift the corded handset.
. Press the redial button.
- Or -
3. Press the redial button first, then lift the corded handset.
If you get a busy signal, and want to keep dialing the number, press the redial button
to quickly redial the number.
Cordless Handset
1. Press TALK/CALL BACK or SPEAKER button.
. Press the redial button.
- Or -
3. Press the redial button then press the TALK/CALL BACK or SPEAKER button.
If you get a busy signal, and want to keep dialing the number, press the redial button
to quickly redial the number again.
Hold
Press the hold button on the base to put a call on hold. The hold indicator light turns on.
To take a call off hold, press the hold button again, and the hold indicator light turns
off.
• To switch a call on hold from the base to the cordless handset, press TALK/
CALL BACK or SPEAKER on the cordless handset.
If you continue the call on a separate extension phone, your phone releases the line to
the extension phone, and the hold indicator light turns off.
Paging the Cordless Handset
This feature helps you locate a misplaced handset.
Press and release the page button on the base. The display shows
PAGING HANDSET.
The cordless handset beeps continuously and displays PAGING FRM BASE for about
two minutes or until you press any button on the cordless handset or press page on
the base.
NOTE: You may still page the cordless handset even if the ringer is
turned off.