Garmin GPSMAP 740s - Manual (Page 27)

GPSMAP 700 Series Owner’s Manual 23
Combinations
When overlay numbers are displayed on the Combination screen, the navigation inset
➌
is shown during
navigation. The compass tape
➍
can be shown or hidden in each overlay.
Combination Screen with Data Overlay
➌
➍
Selecting a Data Overlay on a Combination Screen
1. From the Home screen, select Combinations.
2. Select a combination.
3. Select Menu > overlay Numbers.
4. Select
or to select a data overlay.
Configuring Data Fields on a Combination Screen
You can select the type of data shown within a data field.
1. From the Home screen, select Combinations.
2. Select a combination.
3. Select Menu > overlay Numbers.
4. Select
or to select a data overlay.
5. Touch a data field.
6. Select a category of data.
7. Select the data to be displayed.
Configuring the Navigation Inset on a Combination Screen
The navigation inset is shown only when the boat is navigating to a destination.
1. From the Home screen, select Combinations.
2. Select a combination.
3. Select Menu > overlay Numbers.
4. Select
or to select a data overlay.
5. Select Navigation Inset > Nav. Inset Config.
6. Complete an action:
• Select Route Leg Details > on to show waypoint velocity made good (VMG) when navigating a route
with more than one leg.
• Select Next Turn > Distance to show next-turn data based on distance.
• Select Next Turn > Time to show next-turn data based on time.
• Select Destination, and select Distance, Time to Destination, or Arrival to indicate how the
destination data appears.