Clock and timer, Using the clock and timer – GE Monogram 30 Wall Oven User Manual

Page 8

Advertising
background image

Clock and Timer

Wall Oven

8

MANUAL

TIMED

SET

START

TIME

TIMER

CLOCK

COOK

TIME

Double oven clock and timer

Single oven clock and timer

Using the
clock and
timer

When you first turn on the power to your oven,
or after a power failure, the display will show
all 8’s, then dashes and the set clock symbol.

To set or change the time of day,

press the

CLOCK button. The control will beep. The set
clock symbol will appear in the display.

Press the increase “

▲” or decrease “▼” button.

If the increase “

▲” or decrease “▼” button is

pressed and released, it will change the time in
one minute increments. If the increase “

▲” or

decrease “

▼” button is pressed and held, the

time will change in 10 minute increments.

Once the clock is set, press the CLOCK button
again. The control will beep and the set clock
symbol will disappear.

To check the time of day when the timer is in
use press the CLOCK button. The time of day
will be displayed briefly and then will return to
the timer function.

The timer button does not control oven
functions. The timer may be used as a
convenient kitchen timer.

To set,

press the TIMER button. The control

will beep. The display will show “:00” and the
words SET TIMER.

Press the increase “

▲” or decrease “▼” button

to set the amount of time desired.

If the increase “

▲” or decrease “▼” button is

pressed and released, it will change the time in
one minute increments. If the increase “

▲” or

decrease “

▼” button is pressed and held, the

time will change in 10 minute increments.

The timer will start after approximately 4
seconds. The colon blinks when the timer
starts counting down. The word TIMER will
remain in the display during the countdown.
The timer will count down in minutes until the
last minute, then it will count down in seconds.

When timing is complete the word TIMER
will blink and the control will beep three
times. The display will return to the time of
day or any active programmed function and
the control will beep twice every 10 seconds
until any button is touched.

To cancel the timer,

press the TIMER button

once. If no time is set, the timer cancels itself
after approximately 5 seconds. The time of day
is then displayed.

Advertising