GE 49218 - Manual (Page 7)

6 7
Zoneline
®
units
RAB71A (All Zoneline Series)
Standard Wall Case
The RAB71A is a galvanized steel wall sleeve with expanded
polystyrene foam insulation. It is welded and protected with
baked-on enamel. Welded areas are protected with a sealing
compound to prevent rust. The RAB71 wall case accepts all
Zoneline chassis models.
Zoneline units
* A-B Series: Zonelines built before 1987 – Zoneline I, II, III, and IV; AZC Series: Zonelines built from 1987 to 1992 – includes AZR Series – Zoneline 1000, 2000, 2500, 2700, 000,
4000, 5000; AZ Series: Zonelines built after 1992 – Zoneline 2100, 100, 2600, 5100 / Zoneline 2200, 200, 5200 / Zoneline 2500, 500, 5500 / Zoneline 2800, 800, 5800.
RAD10 (All Zoneline Series)
Internal/External Drain Kit
For more positive control of condensate water, the RAD10
drain kit routes condensate to the exterior or to the interior
of the building through the wall case. Suitable provision (field
applied) should be made to connect the RAD10 drain tube to
a drain system in the building. Drain tube assemblies are
1/2" O.D. copper and consist of a short right-angle tube and
a 6"-long straight tube to suit the particular application.
RAF452 (AZ Series*—2200, 200 and 5200 only)
Replacement Standard Room Cabinet
Room cabinet with wrap-around design has attractive
textured finish which matches unit sleeve. Cabinet is
injection-molded of high-impact polystyrene. Cabinet fastens
to chassis without tools or hardware. The room cabinet
contains the slide-out filters and 2-position reversible
discharge louvers.
RAB77A4 (All Zoneline Series)
SMC Wall Case
The Zoneline SMC universally designed wall case by
GE utilizes a fiberglass-reinforced polyester compound to
produce a durable, non-corrosive wall case for all Zoneline
Packaged Terminal Air Conditioners and Heat Pumps. The
RAB77A4 SMC wall case accepts all Zoneline chassis models.
RAF452A (AZ Series*—2500, 500 and 5500 only)
Replacement Standard Room Cabinet
Room cabinet with wrap-around design has attractive
textured finish which matches unit sleeve. Cabinet is injection-
molded of high-impact polystyrene. Cabinet fastens to chassis
without tools or hardware. The room cabinet contains the
slide-out filters and 2-position reversible discharge louvers.