Replacing the light bulbs, Caution – GE BOTTOMFREEZER 200D9366P004 User Manual

Page 13

Advertising
background image

13

Refrigerator Lights

CAUTION:

Light bulbs may

be hot.

Unplug the refrigerator.

To remove the light shield, grasp the

shield at the back and pull out to release

the tabs at the back.

Rotate the shield down and then forward

to release the tabs at the front of the

shield.

After replacing with an appliance bulb

of the same or lower wattage, replace

the shield.

Plug the refrigerator back in.

NOTE: Appliance bulbs may be ordered from
GE Parts and Accessories, 800.626.2002.

Freezer Light

Replacing the light bulbs.

ge.com

Turning the control to the 0ff position does not remove power to the light circuit.

Appearance may vary

CAUTION:

Light bulbs may

be hot.

Unplug the refrigerator.

The bulb is located at the top of the

freezer inside a light shield. To remove the

shield, grasp the shield at the back and
pull out to release the tabs at the back.

Rotate the shield down and then forward

to release the tabs at the front of the

shield.

After replacing with an appliance bulb

of the same or lower wattage, replace

the shield.

Plug the refrigerator back in.

Consumer S

uppor

t

Tr

oubleshooting Tips

Operating Instructions

Safety Instructions

Installation

Instructions

Advertising