Grizzly G9962Z - Manual (Page 19)

G0445/G0582/G9962Z/9962ZX Wide Belt Sander -17-
Figure 11. Regulator knob.
Dust Collection
Figure 12. Typical three-port configuration.
An efficient and clean dust collection system is
essential to the proper function of the sander.
Ensuring a healthy work environment is also
dependent upon cleaning and maintaining your
dust collection system. For the G0582/G9962Z/
9962ZX we recommend a minimum of 800CFM
at the machine, and for the G0445 we recom-
mend a minimum of 1200 CFM at the machine.
To hook up a dust collection system:
1. Install the dust ports (Figure 12) to the
mounting locations on the top of the sanding
unit with the supplied M6-1 x 10 Phillips head
screws.
2. Using 4" hose clamps, secure the hoses
from your dust collection system to the dust
ports.
Inventory
Crate contents, see Figure 10.
A. Sanding Unit (Not Pictured)
B. (2) Dust Ports 4"
C. Sanding Belt 100 Grit (G0582/G0445)
Sanding Belt 100 Grit (G9962Z/G9962ZX)
D. Sanding Belt 180 Grit (G0582/G0445)
Sanding Belt 150 Grit (G9962Z/G9962ZX)
E. (2) Platen Graphite Flap (G0582/G0445)
F. Platen Felt (G0582/G0445)
G. Tool Box
—Phillips Head Screwdriver #2
—Standard Screwdriver #2
—Open-End Wrench 8/10mm
—Open-End Wrench 12/14mm
—Open-End Wrench 17/19mm
—Metric Hex Wrench Set 10 Pcs.
—(2) Door Keys
—(2) Ceramic Limit Switch Rub Rods
—(1) Flexible Grease Gun Extension
—(1) Graphite Holder Bar (G0582/G0445)
Figure 10. Parts layout.
B
C
D
E
F
G