Grizzly G0605X - Manual (Page 45)

G0605X/G0606X Extreme Series 12" Table Saw
-43-
Figure 67. G3445 Precision Saw Tool.
G3445—Precision Saw Tool
This high impact plastic Saw Aid™ quickly mea-
sures blade height and angle and can also serve
as a solid push stick. Includes a graduated ruler
guide and center finder.
H7583—Grizzly Tenoning Jig
Our fully adjustable tenoning jig handles stock
up to 3
1 ⁄
4
" thick and features an adjustable bevel
angle with a 90° to 75° range. The two large grip
handles, adjustable guide bar, multi-position con-
trol levers, and extra large clamping handwheel
will ensure accurate and repeatable results. A top
seller!
H9389—Zero Clearance Table Saw Insert for
G0605X/G0606X
Made especially for the G0605X/G0606X table
saw. Height is easily adjustable. Special phenolic
material.
Figure 66. Superbar™ and Master Plate.
G7581—Superbar™
G7582—Master Plate
The miter slot mounted Superbar™ will align, tune
and calibrate your tablesaw to within ±.001 in just
minutes. Replace your tablesaw blade when cali-
brating the double disk ground Master Plate for a
precision measurement, with no runout!
Figure 68. H3308 SHOP FOX ® Push Stick.
H3308—SHOP FOX ® Push Stick
Measuring 13 1 ⁄
2
" overall, this push stick allows the
operator to keep their hands at a safe distance
away from the blade or cutter.
Figure 69. H3309 SHOP FOX ® Featherboard.
H3309—SHOP FOX ® Featherboard
Designed to lock into a standard 3 ⁄
8
" x 3 ⁄
4
" miter
slot, this featherboard is fully adjustable to accom-
modate a wide range of workpieces. Reduce the
likelihood of kickback with this convenient acces-
sory.