Genie Z-34 - Manual (Page 35)

Operator's Manual Fourth Edition • Third Printing
Part No. 1000048 Z-34/22 IC 33
TRANSPORT AND LIFTING INSTRUCTIONS
Securing to Truck or Trailer for
Transit
Always chock the machine wheels in preparation
for transport.
Turn the key switch to the off position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Securing the Chassis
Use the tie points on the drive chassis for
anchoring down to the transport surface.
Use chains or straps of ample load capacity.
Use a minimum of 4 chains.
Adjust the rigging to prevent damage to the chains.
Securing the Platform
Make sure the jib and platform are in the stowed
position.
Place a block under the edge of the platform
beneath the platform entry.
Secure the platform with a nylon strap placed over
the platform mount near the platform rotator (see
below). Do not use excessive downward force when
securing the boom section.