Grizzly H0601 - Manual (Page 11)

H0601 14.4V Cordless Jig Saw -9 -
OPERATING TIPS AND MAINTENANCE
Disassembly and improper reassembly
of this device can result in electrical
shock danger. Always have this device
serviced by a qualified electrical repair
technician. Serious injury will result.
Operating Guides and Tips
Avoid overloading the jig saw . Do not
apply excessive pressure to the tool
while using. If the speed drops
abnormally, decrease pressure
immediately.
Ensure the safety of the workplace.
Clear the work area of all parts and
debris that may cause injury by flying
objects. Securely fix the object to be
worked on in a vise or otherwise
clamp to avoid injury. Do not attempt
to hold workpiece by hand.
Inspect the tool before use. Run the tool
free of the workpiece before using to
ensure all parts are running smooth-
ly and there are no abnormal sounds
or sparks. If any defect is found,
have unit serviced.
Know your work site. Take care to make
sure the material being worked on is
not supporting another structure, or
that there are no obstructions.
Before cutting into walls, check for
wires, other electrical hazards, gas
lines or plumbing which may be hid-
den in the wall space.
Maintenance
Your cordless power tool will give you hun-
dreds of hours of operation time before
ever needing service. The electrical com-
ponents of this cordless saw are not user
serviceable. Repair should always be
undertaken by a qualified electrical repair
technician.
Keep the saw free from dirt and grease.
Always store it in a dry place, preferably in
the case that is supplied.
The battery will require periodic recharg-
ing, and eventually replacement after it has
exceeded its recharge life (approximately
800-1000 recharge cycles). You will notice
extended charging times or shortened
operation time as the battery experiences
more cycles. Battery must be recycled or
disposed or properly. Refer to the Grizzly
catalog for replacement batteries.