Grizzly H0601 - Manual (Page 7)

H0601 14.4V Cordless Jig Saw -5 -
BEFORE YOU START
The battery in your new cordless power
tool will not be fully charged when you
receive it. Follow the instructions below to
charge your battery.
Battery charging with the standard
charger :
1. Plug the power cord for the charger
into the 110/120V outlet.
2. Insert the battery into the charger.
The battery fits into the oval recess in
only one way. Do not force the bat-
tery. Insert until it locks into place.
3. The red LED light on the charging unit
will come on when the battery begins
its charging cycle.
4. Charge battery for 3-5 hours for a full
charge from a fully depleted condi-
tion. The red LED will not go off until
the battery is removed from the
charger base.
Fig 1. Location of controls.
On/Off Trigger
Orbit Selector
Blade
Plunger
1 3 ⁄
8
" Dust Port
Footplate
Trigger Saftey Button
Blade Locking
Screw
Control Location
Refer to Figure 1 for the location of the key
components and controls of the machine.
These controls are called out later in the
manual for their specific use when operat-
ing the saw. Become familiar with the con-
trols and all of the adjustments and set-
tings before operating the Jig Saw.
Specifications
Speed: 2900 SPM
Motor Type: Universal Brush Motor
Motor Power: 14.4V
Blade Orbit: 4 Settings
Stroke Length: 1"
Blade: Universal Style Mounting, 3" - 5"
Blade Guide: Grooved Roller Bearing
Footplate: Adjustable from +45˚ to -45˚