Genie TML-4000N - Manual (Page 12)

10 Genie TML-4000 and TML-4000N Part No. 97600
Operator's Manual Third Edition • Second Printing
Observe and Obey:
Only routine maintenance items specified in this
manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Maintenance Symbols Legend
The following symbols have been
used in this manual to help
communicate the intent of the
instructions. When one or more of
the symbols appear at the
beginning of a maintenance
procedure, it conveys the meaning
below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be
required to perform this procedure.
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Check the oil level with the
engine off.
1 Check the oil level dipstick. Add oil if needed.
Deutz F3M 1008 Engine
Deutz F3M 1008F Engine
oil type 10W-40
oil type cold conditions 5W-40
Perkins 103-10 Engine
oil type 15W-40
oil type cold conditions 5W-20
Perkins 403C-11G
oil type 15W-40
oil type cold conditions 5W-20
Maintenance