Rs-232 / telnet / udp commands – Gefen DVI MATRIX EXT-DVI-16416 User Manual
Page 25
Advertising
21
RS-232 / TELNET / UDP COMMANDS
#predidst Command
The #predidst command reads the downstream EDID. This command displays a table
containing details relating to the Local EDID and the monitor name.
Syntax:
#predidst
Parameters:
None
#prloedid Command
The #prloedid command reads the local EDID of a specified input and spools it to the serial
port.
Syntax:
#prloedid param1
Parameters:
param1
Input
[1 ... 16]
Advertising