Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 31)

27
RS-232 / TELNET / UDP COMMANDS
#sgateway Command
The #sgateway sets the IP gateway (router) address. Dot-decimal notation must be used
when specifying the IP address. The default gateway is 192.168.1.254.
Syntax:
#sgateway param1
Parameters:
param1
IP gateway
Notes:
The matrix must be rebooted after executing this command.
Example:
#sgateway 192.168.1.1
New IP Gateway set to: 192.168.1.1
#show_tcp_term_pass Command
The #show_tcp_term_pass command displays the current TCP password for login
(if required).
Syntax:
#show_tcp_term_pass
Example:
#show_tcp_term_pass
TCP Terminal password: reindeer