Gefen DVI MATRIX EXT-DVI-16416 - Manual (Page 27)

23
RS-232 / TELNET / UDP COMMANDS
#ipconfig Command
The #ipconfig command displays all TCP/IP settings on the matrix.
Syntax:
#ipconfig
Parameters:
None
Example:
#ipconfig
-------------- TCP/IP settings -------------
MAC add = 00:1C:91:01:01:01
IP add = 192.168.1.72
Net Mask = 255.255.255.0
Gateway = 192.168.1.254
Web Server Port = 80
TCP Terminal Server Port = 23
TCP Terminal password at login is set to ON
UDP Server Port = 25665
UDP Remote IP = 110.0.255.255
UDP Remote Port = 26989
UDP Access = Disabled
#resetip Command
The #resetip command resets all TCP/IP settings to factory defaults.
Syntax:
#resetip
Parameters:
None
Notes:
The matrix must be rebooted after executing this command.