GIGABYTE GA-7VAC - Manual (Page 36)

- 32 - GA-7VA-C Motherboard
English
F OnChip IDE Channel0
M
When enabled, allows you to use the onboard primary PC I IDE. If a hard disk controller card
is used, set at Disabled.
8 Enabled Enable onboard 1st channel IDE port. (Default v alue)
8 Disabled Disable onboard 1st channel IDE port.
F OnChip IDE Channel1
MWhen enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card
is used, set at Disabled.
8 Enabled Enable onboard 2nd channel IDE port. (Default v alue)
8 Disabled Disable onboard 2nd channel IDE port.
F IDE1 Conductor Cable
8 Auto Will be automatically detected by BIOS (Default Value)
8 ATA66/100/133 Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure y our IDE dev ice
and cable is compatible with ATA66/100/133)
8 ATA33 Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable
is compatible with ATA33)
F IDE2 Conductor Cable
8 Auto Will be automatically detected by BIOS (Default Value)
8 ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure y our IDE dev ice
and cable is compatible with ATA66/100/133)
8 ATA33 Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable
is compatible w ith ATA33).
FAC97 Audio
8 Auto BIOS w ill automatically detect onboard AC97 Audio. (Default v alue)
8 Disabled Disabled AC97 Audio.
FUSB 1.1 Controller
MDisable this option if you are not using the onboard U SB feature.
8 Enabled Enabled USB Controller. (Default value)
8 Disabled Disabled USB Controller.