English – GIGABYTE GA-7VAC User Manual
Page 46
- 42 -
GA-7VA-C Motherboard
English
F PCI/AGP Frequency (MHz)
8
The v alues depend on CPU Host Frequency(Mhz) .
F DRAM Clock (MHz)
8
Please set DRAM Clock according to y our requirement.
If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to "100-DDR200".
If you use DDR266 DRAM module, please set “DRAM Clock(MHz)" to "133-DDR266".
If you use DDR333 DRAM module, please set “DRAM Clock(MHz)" to "166-DDR333".
If you use DDR400 DRAM module, please set “DRAM Clock(MHz)" to "200-DDR400".
Incorrect using it may cause y our system broken. For pow er End-User use only !
8
Auto
Set Memory frequency by DRAM SPD data. (Default v alue)
F CPU OverVoltage Control
Increase CPU v oltage may get stable for Ov er_Clock. But it may damage to CPU w hen enable this feature.
8
Auto
Supply v oltage as CPU reguired. (Default v alue)
8
+5% / +7.5% / +10%
Increase voltage range as user selected.
F AGP OverVoltage Control
Increase AGP v oltage may get stable for Ov er_Clock. But it may damage to AGP Card w hen enable this
feature.
8
Auto
Supply v oltage as AGP Card reguired. (Default v alue)
8
+0.1V~+.03V
Set AGP v oltage from 1.6V~1.8V.
F DIMM OverVoltage Control
Increase DRAM v oltage may get stable for Ov er_Clock. But it may damage to DRAM module w hen enable this
feature.
8
Auto
Supply v oltage as DRAM module reguired. (Default v alue)
8
+0.1V~+.03V
Set DIMM v oltage from 2.6V~2.8V.