GIGABYTE GA-7VAC - Manual (Page 40)

- 36 - GA-7VA-C Motherboard
English
F ACPI Suspend Type
8 S1(POS) Set suspend ty pe to Pow er On Suspend under ACPI OS(Power On Suspend).
(Default v alue)
8 S3(STR) Set suspend ty pe to Suspend To RAM under ACPI OS (Suspend To RAM).
FUSB Device Wakeup From S3
(When ACPI S uspe nd Type is set [S 3(S TR)])
USB device wakeup From S3 can be set when ACPI standby state set to S3/STR.
8 Enabled USB Dev ice can w akeup sy stem from S3.
8 Disabled USB Dev ice can’t wakeup sy stem from S3. (Default v alue)
FPower LED in S1 State
8 Blinking In standby mode(S1), pow er LED w ill blink. (Default Value)
8 Dual/Off In standby mode(S1):
a. If use single color LED, pow er LED w ill turn off.
b. If use dual color LED, pow er LED w ill turn to another color.
F Soft-off by PWRBTN
8 Instant-off Press pow er button then Pow er off instantly. (Default value)
8 Delay 4 Sec. Press pow er button 4 sec to Pow er off. Enter suspend if button is pressed less
than 4 sec.
FAC Back Function
8 Memory Sy stem power on depends on the status before AC lost.
8 Soft-Off Alway s in Off state w hen AC back. (Default v alue)
8 Full-On Alw ays pow er on the system when AC back.
F Keyboard Power On
This feature allow s you to set the method for powering-on the system.
The option “Password“ allow s you to set up to 8 alphanumeric characters to power-on the system.
The option “Any Key” allows y ou to touch the key board to power on the system.
The option “Keyboard 98” allows you to use the standard keyboard 98 to power on the system.
8 Password Enter from 1 to 8 characters to set the Key board Pow er On Password.
8 Disabled Disabled this function. (Default v alue)
8 Key board 98 If y our keyboard have “POWER Key ” button, y ou can press the key to
pow er on y our sy stem.