Installation instructions reversing the door swing, Transfer center hinge bracket to the left, Transfer door stops – GE 197D3354P013 User Manual

Page 16

Advertising
background image

TRANSFER CENTER HINGE
BRACKET TO THE LEFT

Remove the center hinge bracket by removing the
three Torx

®

screws.

NOTE: Keep these screws with the hinge bracket.
They are long screws and will be used when installing
the hinge on the other side.

On some models, you will need to remove the color-
matched caps from the screw heads before you can
remove the screws. Use the edge of a thin flat blade to
gently pry the caps off the screw heads. (A putty knife
works well for this.) Cover the blade with tape to
prevent scratching the paint.

Remove the three Torx

®

screws from the center left

side of the cabinet. Screw them into the holes on
the right side.

Place the center hinge bracket over the holes at
the center left side of the cabinet. Insert and
tighten the three long screws.

Replace the caps by snapping them over the screws
with your finger.

5

TRANSFER DOOR STOPS

On each door, move the metal door stop from the
right to the left.

Move any screws from the left to the right.

6

16

Door Stop

Door Stop

Left Side

Right Side

Screw Cap

Installation Instructions

REVERSING THE DOOR SWING

(CONT.)

TRANSFER REFRIGERATOR
DOOR HANDLE TO THE RIGHT

Plastic handle:

Remove the plug

button by carefully
prying under the edge
with a putty knife.

Remove the

exposed screw holding
the handle.

Remove

the two screws holding
the handle to the top
of the door.

Stainless steel handle (on some models):

Remove the two

screws holding the
handle to the top of
the door. Loosen the
set screw with the
3/32″ Allen wrench
(supplied) and remove
the handle.

Remove

the handle fastener
with the 3/16″ Allen
wrench (supplied).

Transfer the fastener

to the right side and
move the plug button
to the left side of the
refrigerator door.

7

After removing the
handle:
Move the small
plug buttons from the top
right side of the door top
and insert them into the
holes on the opposite side.

Small Plug
Buttons

Move the large plug
button from the left
edge of the door and
insert it into the hole
on the opposite side.

1

2

3

Handle
Plug

Handle
Plug

1

2

3

Fastener

Plug
Button

Plug Button

Advertising