Installation instructions reversing the door swing, Re-hang the refrigerator door, Re-hang the freezer door – GE 197D3354P013 User Manual

Page 18

Advertising
background image

RE-HANG THE REFRIGERATOR
DOOR

Lower the refrigerator door onto the bottom
hinge pin.

9

Straighten the door and line it up with the center
hinge bracket.

Reinstall the center hinge pin with a 3/8″ socket.
Turn it until it extends through the hinge bracket
and into the door.

Plastic
Washer

Plastic Washer

Refrigerator Door

Hinge Pin

Center Hinge
Bracket

18

RE-HANG THE FREEZER DOOR

Lower the freezer door onto the center hinge pin.

Be sure the washer is in place.

10

Lift the top hinge so the pin fits into the door socket.

Support the door on the handle side and make sure
the door is straight and the gap between the doors is
even across the front. While holding the door in
place, tighten the top hinge screws.

Center Hinge Pin

Plastic Washer

Installation Instructions

REVERSING THE DOOR SWING

(CONT.)

TRANSFER FREEZER DOOR
HANDLE TO THE RIGHT (CONT.)

Stainless steel handle
(on some models):

Attach the handle to

the fastener and tighten
with the 3/32″ Allen
wrench (supplied).

Line up the handle

with the screw holes in
the bottom of the door
and tighten the screws.

8

1

2

Advertising