Safety instructions for pneumatic tools – Grizzly H7951 User Manual
Page 4
h7949/h7950/h7951 nailer
-1
-
10. use proper air hose for the
tool. Make sure your air hose is in
good condition and is long enough to
reach your work without stretching.
11. Wear proper apparel. Do not
wear loose clothing, gloves, neck-
ties, rings, bracelets, or other jew-
elry which may get caught in moving
parts. non-slip footwear is recom-
mended. wear a protective hair cov-
ering to contain long hair.
12. alWays use ansi approved
safety glasses. also use a
face or dust mask if cutting operation
is dusty. Everyday eyeglasses only
have impact resistant lenses, they
are not safety glasses.
13. alWays Wear ansi approved
hearing protection.
14. secure WorK. use clamps or a
vise to hold work when practical. it is
safer than using your hand and frees
both hands to operate tool.
15. maintain tools With care.
Keep tools lubricated and clean
for best and safest performance.
Follow instructions for lubricating
and changing accessories.
16. reduce
the
risK
of
unintentional starting. Do
not carry tool with hand on trig-
ger and always disconnect from air
when not in use.
17. disconnect tools before ser-
vicing, changing accessories, or
moving to another location.
18. do not overreach. Keep
proper footing and balance at all
times.
19. use
the
recommended
accessories. Consult owner’s
manual for recommended acces-
sories. the use of improper acces-
sories may cause risk of injury.
20. checK for damaged parts
before using. Check for bind-
ing and alignment of parts, broken
parts, part mounting, loose bolts,
and any other conditions that may
affect machine operation. repair or
replace damaged parts.
21. never leave unattended
tool connected to air.
Disconnect the air hose and do not
leave tool until it is relieved of any
built up pressure.
22. never alloW untrained
users to use this tool
While unsupervised.
23. if you are unsure of the
intended operation, stop
using the tool. seek formal
training or research books or maga-
zines that specialize in pneumatic
tools.
safety instructions for pneumatic tools