Grizzly H7951 - Manual (Page 5)

h7949/h7950/h7951 nailer -2 -
1. hand inJuries: Do not place
your hands near the nail point
of entry. a nail can deflect and
tear through the surface of the
workpiece, puncturing your hand
or fingers.
2. combustible gases: never
connect the nailer to pressur-
ized oxygen or other combustible
gases as a power source
. only
use filtered, lubricated, and regu-
lated compressed air.
3. safe handling: never point
the nailer at others! Do not keep
the trigger pulled when loading
fasteners, carrying, or holding tool.
Carry the nailer only by the handle,
never by any other part. Do not
carry the nailer by the air hose.
Disconnect the nailer from the air
hose when going up and down
ladders.
4. air hose: Make sure your air
hose is designed for the tool in
use, is in good condition, and is
long enough to reach your work
without stretching. however, an
overly long air hose in the work
area may be a tripping hazard.
additional safety instructions for nailers
5. compressed air rating: Do
not connect the nailer to compressed
air that exceeds 120 psi.
6. checK valve: Do not use a check
valve or any other fitting that allows
air to remain in the tool.
7. cleaning: never use gasoline or
other flammable liquids to clean the
nailer; vapors in the nailer may ignite
by a spark and cause the nailer to
explode.
8. operating Questions: if you
are not sure about the intended
operation, stop using the nailer.
seek formal training or research
sources that specialize in pneumatic
tools.
9. maintenance: always disconnect
air from the nailer when servicing or
installing nails. During adjustments
or maintenance, a nailer connected
to air may fire accidentally, causing
serious personal injury.