GE DCVH515 User Manual

Page 7

Advertising
background image

– 7 –

1

2

Power

Press to “wake up” the display. If the display is active, press to put the dryer in the standby mode.

NOTE: Pressing POWER does not disconnect the appliance from the power supply.

Dry Cycles

The dry cycle controls the length and tumble speed of the drying process. The chart below will
help you match the dry setting with the loads.

Sensor Cycles

COTTONS

For cottons and most linens.

MIXED LOAD

For loads consisting of cottons and poly-blends.

EASY CARE

For wrinkle-free and permanent press items.

ACTIVE WEAR

Clothing worn for active sports exercise and some casual wear. Fabrics include new technology finishes
and stretch fibers such as Spandex.

DELICATES

For lingerie and special-care fabrics.

DRYEL

Designed for use with the DRYEL

“dry clean only” fabric care system. See product package for directions.

For questions or issues related to use and performance of DRYEL

, see the Website at: www.dryel.com.

SPEED DRY

For small loads that are needed in a hurry, such as sports or school uniforms. Can also be used if the
previous cycle left some items damp, such as collars or waistbands.

Timed Dry Cycles

DEWRINKLE

For removing wrinkles from items that are dry or slightly damp. This cycle is not recommended for
delicate fabrics.

WARM UP

Provides 10 minutes of warming time to warm up clothes.

AIR FLUFF

Use this feature to tumble items without heat.

My Cycle

(on some models)

MY CYCLE

Press to use, create or modify custom dry cycles.

Timed Dry

Use to set your own dry time. TIMED DRY is also recommended for small loads.
To use TIMED DRY:

1. Turn dry cycle dial to TIMED DRY.
2. Select the drying time by pressing the + and buttons.
3. Select the DRY TEMP.
4. Close the door.
5. Press START.

Sensor Dry Level

The sensor continuously monitors the amount of moisture in the load. When the moisture in your
clothes reaches your selected dry level, the dryer will stop.

MORE DRY

Use for heavy or mixed type of fabrics.

DRY

Use for normal dryness level suitable for most loads. This is the preferred cycle
for energy saving.

LESS DRY

Use for lighter fabric (ideal for ironing).

DAMP

For leaving items partially damp.

3

4

(Continued Next Page)

Advertising
This manual is related to the following products: