Grizzly H8145 - Manual (Page 13)

H8145 Baby Table Saw
-11-
Wear safety glasses dur-
ing the entire set up pro-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu-
al to become familiar with
the controls and opera-
tions before starting the
machine!
Set Up Safety
SECTION 3: SET UP
The following items are needed to complete the
set up process, but are not included with your
machine:
Description Qty
• Safety Glasses (for each person) .............. 1
• Shop Vacuum or Dust Collector ................. 1
• Dust Hose 1 1 ⁄
2
" (length as needed) ............ 1
• Hose Clamp 1 1 ⁄
2
" ....................................... 1
Items Needed for Set
Up
The Model H8145 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
Unpacking
Machine Inventory
Box Inventory Qty
A. Table Saw Unit ........................................... 1
B. Push Stick .................................................. 1
C. Arbor Wrenches 8 & 19mm ............... 1 each
D. Fence ......................................................... 1
E. Fence Knobs, Washers, Plates ......... 2 each
F. Miter Sled (not shown) ............................... 1
A
Figure 3. Box Inventory.
B
E
D
C