Grizzly H8145 - Manual (Page 15)

H8145 Baby Table Saw
-13-
SECTION 4: OPERATIONS
Basic Controls
ON/OFF Switch: Starts and stops the motor. The
switch is equipped with a disabling key that can
be removed to prevent unauthorized people from
using the machine.
Fence Lock Knobs: Lock/unlock each end of the
fence when setting the fence for workpiece cut-
ting width.
Blade Tilt Lock Handles: Lock/unlock the tilt
angle of the blade for bevel or straight cutting.
A tilt degree scale is located at the front of the
machine to indicate the current blade position.
Operation Safety
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and clothing
can get caught in machin-
ery and cause serious per-
sonal injury. Keep loose
clothing and long hair
away from machinery.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Keep the blade guard in
the down position at all
times. Failure to do this
could result in serious
personal injury or death.
Figure 6. Table saw controls (front).
ON/OFF
Switch
Blade Tilt
Lock Handle
Fence Lock
Knob
Figure 7. Table saw controls (rear).
Blade Tilt
Lock Handle
Fence Lock
Knob