Optional connections, Connecting to an stereo system, Connecting to a digital av receiver – Philips Magnavox mdv436 User Manual
Page 14: English
English
14
AUDIO OUT
DIGITAL
OUT
VIDEO OUT
COAXIAL
AUDIO
IN
STEREO
DIGITAL
Connecting to an stereo
system
AUDIO OUT
DIGITAL
OUT
VIDEO OUT
COAXIAL
AUDIO
IN
DIGITAL
A V R eciever
Receiver has a PCM, Dolby Digital
or MPEG decoder
A
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
B
Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In socket on your receiver (cable not
supplied).
C
Set the DVD player’s digital output to
PCM or ALL depending on the
capabilities of your receiver (see page 30
{Digital Out}).
Tip:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
Stereo system has right/ left Audio
In sockets
A
Select one of the video connections
(CVBS VIDEO IN, COMPONENT VIDEO
IN) depending on the options available on
your TV.
B
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) sockets of
the DVD Player to the corresponding
AUDIO IN sockets on the stereo system
(cable supplied).
Connecting to a digital AV
receiver
Optional connections
TIPS:
Before making or changing any connections, make sure that all the devices are disconnected from
the power outlet.
01-37 MDV435_436_37_eng_RC2.indd 14
01-37 MDV435_436_37_eng_RC2.indd 14
2006-04-27 5:08:03 PM
2006-04-27 5:08:03 PM