Dvd menu options, Using the video setup menu – Philips Magnavox mdv436 User Manual
Page 32
English
32
DVD Menu Options
(continued)
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
Using the Video setup menu
A
In disc mode, press SETUP.
B
Press select { VIDEO SETUP }.
VIDEO SETUP
VIDEO OUT
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
Video Out
A
In ‘Video Setup’, press
to select
{ VIDEO OUT }, then press .
B
Press
to highlight one of the
options below,
{ INTERLACE - YUV }
use component video cables (Y/Pb/Pr) to
connect the appliance to the TV set, and
the TV set is set to INTERLACE - YUV.
{ P-SCAN YPBPR }
use component video cables (Y/Pb/Pr) to
connect the appliance to the TV set, and
the TV set is set to progressive scan.
B
Press
to select a setting and press
OK to confi rm.
Brightness/ Contrast
Increasing the value will brighten the
picture or vice versa. Choose six (6) for
average setting.
A
In ‘Video Setup’, press
to highlight
{ BRIGHTNESS } or { CONTRAST },
then press .
The menu appears.
B
Press
to adjust the setting that best
suit your personal preference.
C
Press OK to confi rm.
Hue
Use cursor buttons
to move the
slider to adjust the hue of the video
output.
Saturation
Use cursor buttons
to move the
slider to adjust the saturation of the
video output.
Sharpness
You can personalize your picture color
by adjusting sharpness.
A
In ‘Video Setup’, press
to highlight
{ SHARPNESS } then press .
B
Press
to select a setting, then press
OK to confi rm your selection.
01-37 MDV435_436_37_eng_RC2.indd 32
01-37 MDV435_436_37_eng_RC2.indd 32
2006-04-27 5:08:10 PM
2006-04-27 5:08:10 PM