Philips Magnavox mdv436 - Manual (Page 18)

English
18
Getting Started
(continued)
Step 3 : Setting up
Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
– Ensure that you have connected this
DVD player to a progressive scan TV
using the Y Pb Pr connection (see page
12).
– Ensure that you have completed the
basic installation and set-up.
A Turn on your TV and set to interlace
mode (refer to your TV user manual).
B Press POWER on the remote control
to turn on the DVD player.
C Select the correct video-in channel.
The DVD background menu appears.
D Press SETUP.
E Press to select {VIDEO SETUP}
F Press repeatedly to select
{ VIDEO OUT }.
VIDEO SETUP
VIDEO OUT
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
INTERLACE-YUV
P -SCAN YPBPR
G Press to select { P-SCAN YPBPR },
then press OK.
The menu will appear on the TV.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
ENABLE PROGRESSIVE
OK
ENSURE YOUR TV SUPPORTS PSCAN
IF TV DISPLAY IS ABNORMAL
PLEASE WAIT 15 SECONDS
FOR IT TO RECOVER
NO
H Press to select { OK } and press OK
to confi rm.
There will be a distorted picture on
the TV at this state until you turn
on the progressive scan mode on
your TV.
I Turn on your TV progressive scan mode
(refer to your TV user manual).
The menu will appear on the TV.
PROGRESSIVE SCAN
OK
YOUR PROGRESSIVE SCAN IS ON
DO YOU WANT TO KEEP THE
CURRENT SETTING
PLEASE WAIT 15 S
NO
J Press to select { OK } and press OK
to confi rm.
The setup is now completed and you
can start enjoy the high quality
picture.
To deactivate Progressive Scan
manually:
Wait for 15 seconds for auto recovery.
Tip:
– There are some progressive scan TVs and
High-Defi nition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the DVD player and your TV.
01-37 MDV435_436_37_eng_RC2.indd 18 01-37 MDV435_436_37_eng_RC2.indd 18 2006-04-27 5:08:05 PM 2006-04-27 5:08:05 PM