Marantz M-CR603 - Manual (Page 21)

17
ENGLISH
Getting Started
Connections
Basic Operations Basic Operations
Advanced Operations
Troubleshooting
Explanation terms
Information
Specifi
cations
Index
Presetting FM/AM stations manually
This unit can be preset with a total of 99 FM and AM broadcast
stations.
1 Tune in the station you want to preset.
2 Press [ENTER/MEMO] or <ENTER> .
“Preset” menu appears.
3 Use ui to select “Add to Preset”, then press
[ENTER/MEMO] , <ENTER> or p .
4 Use ui to select the number to be preset, then press
[ENTER/MEMO] or <ENTER> .
The reception frequency and reception mode are preset and the
display switches to the station name input display.
5 Input the station name.
“Inputting characters” (vpage 35)
• If you do not want to input a station name, press
[ENTER/
MEMO] or <ENTER> without inputting anything else.
• If you make a mistake when inputting, perform the procedure
again. Whatever was previously input is overwritten.
6 Press [ENTER/MEMO] or <ENTER> .
The characters you have input are entered.
• To give names to other stations, repeat steps 1 to 5.
Listening to preset stations
Use [NUMBER] ( 0 – 9 , +10 ) or [CH df] to select the
preset number.
Tuner playback
Calling stations reqistered in Preset List
1 Press [ENTER/MEMO] or <ENTER> .
“Preset” menu appears.
2 Use ui to select “Call Preset”, then press [ENTER/
MEMO] , <ENTER> or p .
The Preset list appears.
3 Use ui to select Preset List, then press [ENTER/
MEMO] , <ENTER> or p .
Deleting stations registered in Preset List
1 Press [ENTER/MEMO] or <ENTER> .
“Preset” menu appears.
2 Use ui to select “Delete Preset”, then press
[ENTER/MEMO] , <ENTER> or p .
The Preset list appears.
3 Use ui to select Preset List, then press [ENTER/
MEMO] , <ENTER> or p .
4 When the prompt “Delete?” appears, press [ENTER/
MEMO] or <ENTER> .
• To cancel the operation, press o .