Marantz M-CR603 - Manual (Page 22)

18
ENGLISH
iPod® playback
With this unit, you can listen to music on an iPod. It is also possible to
operate the iPod from the main unit or remote control.
For the supported iPod models, see “Connecting an iPod” (vpage 8).
n iPod® (vpage 40)
Before playing a USB or an iPod
1 Press ON/STANDBY .
2 Connect USB memory device or iPod connection
cable.
When the USB memory device or iPod is connected to the USB
port on this unit, the input source automatically switches to
“iPod/USB” and fi le playback begins.
NOTE
This function is activated around 1 or 2 minutes after the power is
turned on.
Playing an iPod
1 Press [MODE] to select the display mode.
The mode switches each time the button is pressed.
• There are two modes for displaying the contents recorded on the
iPod.
Remote mode Display iPod information on the display of this unit.
Direct mode Display iPod information on the iPod screen.
• “Direct iPod” is displayed on the display of this unit.
[Selectable mode] Remote mode Direct mode
Display location Main unit display iPod display
Playable
fi les Audio fi le 3 3
Video fi le 3
Active
buttons
Remote control
and main unit
3 3
iPod® 3
The default display mode setting is “Direct mode”.
2 Use ui to select the item, then press [ENTER/
MEMO] or <ENTER> to select the music fi le to be
played.
3 Press 1/3 .
Playback starts.
NOTE
• iPod nano 1G and iPod video do not have Direct mode support.
• Marantz will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
n Remote control and iPod button relations
Remote control
buttons
iPod buttons Operation on this unit
13 13 Play the track / Pause the track.
8 , 9 8 , 9
Play the track from the beginning/Play the
next track.
6 , 7
Press and hold
8 , 9
Press and hold
Fast-reverse the track/Fast-forward the
track.
u , i Click Wheel Select an item.
ENTER/MEMO
or p
Select Enter the selection or plays the track.
MODE –
Switch between the Direct mode and the
Remote mode.
REPEAT – Switch the repeat function
RANDOM – Switch the shuffl e function
o MENU
Display the menu or return to the previous
menu.
2 – Stop the track.
HOME – Return to top menu (Remote mode only)
n To switch the display
During playback, press [DISPLAY] .
The display switches each time the button is pressed.
Artist name
Album name
Disconnecting the iPod
1 Press ON/STANDBY to set the standby mode.
2 Disconnect the iPod cable from the USB port.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control [BUTTON]
Symbols used to indicate buttons in this guide
u
p
[ENTER/MEMO]
i
[SEARCH]
[6] [7]
[MODE]
8 9
2
ON/STANDBY
13
[RANDOM] [REPEAT]
o
[DISPLAY]
[HOME]
ON/STANDBY
<ENTER> u/i 8 9 2 o/p 13