Setting the timer [timer – Marantz M-CR603 User Manual
Page 32
28
ENGLISH
Setting the timer [Timer]
This device can playback using the timer playback (everyday timer,
once timer).
• This unit's timer does not support exit time settings for timer
playback.
n Timer operation when the time settings for
timers overlap
When the once timer and everyday timer are both
set (sleep timer is not set)
• Automatically starts playback at the earlier timer start time set for
either of the timers.
If the current time is not set, enter timer setting mode to get time
setting mode.
Setting the timer
• Everyday timer (“Everyday”)
Playback starts at the set times each day.
• Once timer (“Once”)
Playback starts once only at the set times.
1
Press
[MENU]
.
Turns on the Menu settings mode and the Menu appears on
the display. (vpage 26 “Menu map”)
2
Use
ui
to select “Timer”, then press
[ENTER/
MEMO]
,
<ENTER>
or
p
.
3
Use
ui
to select the timer mode, and use
o
p
to
select “On” or “Off” then press
[ENTER/MEMO]
, or
<ENTER>
.
4
Use
ui
to select “Set Time”, then press
[ENTER/
MEMO]
,
<ENTER>
or
p
.
5
Use
ui
to select “hours”-“minutes” for the timer
start time, then press
[ENTER/MEMO]
,
<ENTER>
or
p
.
6
Use
ui
to select “Source”, then press
[ENTER/
MEMO]
,
<ENTER>
or
p
.
7
Use
ui
to select the input source, then press
[ENTER/MEMO]
,
<ENTER>
or
p
.
Favorite
Preset
DISC
iPod/USB
8
Use
ui
to select the “Volume”, then press
[ENTER/
MEMO]
,
<ENTER>
or
p
.
9
Use
ui
to select the volume “0 - 60”, then press
[ENTER/MEMO]
,
<ENTER>
or
p
.
10
Press
ON/STANDBY
to set the power to standby.
Timer standby mode is set, and the timer indicator lights
orange.
NOTE
• If the unit or remote control is not operated for 90 minutes or more
when the timer is set to on, the standby mode is activated.
• When using timer playback on an iPod touch or iPhone, set the iPod
touch or iPhone to “Sleep” mode. If the power is switched off using
the power off operation, timer playback cannot be used.
For details on the “Sleep” mode of the iPod touch or iPhone, see the
instruction manuals of the products or related web pages.
n Setting the timer to on or off
Perform the operations at “Setting the timer [Timer]” (vpage 28).
• When set to “OFF”, time operation is disabled, but the timer
settings remain unchanged.
n To check the timer settings
Perform the operations at “Setting the timer [Timer]” (vpage 28).
n To change the timer settings
Perform the operations at “Setting the timer [Timer]” (vpage 28).
n To change the setting while setting the timer
Press
o
.
The setting returns to the previous step. Display the setting you
want to change, then make the desired setting.
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this guide
u
p
[ENTER/MEMO]
[MENU]
[CLOCK]
i
ON/STANDBY
o
ON/STANDBY
<ENTER> u/i
o/p