Mercedes-Benz 2003 C-Class Coupe - Manual (Page 70)

70
Safety and Security
Occupant safety
̈ Fold up anchorage ring 1.
̈ Securely fasten hook 2, which is part of
the tether strap, to anchorage ring 1.
Child seat anchors – “LATCH” type
This vehicle is equipped with two “LATCH”
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the rear seats) for
the installation of a “LATCH” child seat
with the matching anchor fittings.
If a child seat is not installed, the “LATCH”
anchors can be folded back between the
seat cushion and the backrest.
̈ Grip inner side of anchors 1 and fold
forward until they lock in place.
̈ Install child seat according to the man-
ufacturer’s instructions.
To fold mounts back
̈ Press down button 2 on each anchor
and return anchor to its catch.
i
For safety, make sure that the hook has
attached to the ring beyond the safety
catch, as illustrated.
i
The child seat must be firmly attached
in the right and left side anchors.
i
Non-“LATCH” type child seats may also
be used and can be installed using the
vehicle’s seat belt system. Install child
seat according to the manufacturer’s
instructions.