Memorex Digital Video Disc Player - Manual (Page 14)

14
CONNECTION (CONTINUED)
CONNECTING THE PLAYER TO A HOME THEATER SYSTEM (VIA COAXIAL/OPTICAL JACK)
NOTES FOR CONNECTING TO A TV:
• If your TV has an HDMI input, connect the player with the HDMI cable for best results, otherwise use the Component,
S-Video or Video OUT jack on the player.
• Set the TV’s TV/VIDEO button or switch to the VIDEO setting.
• When connecting the Player, refer to the owner’s manuals for the TV and the audio system, as well as this manual.
• When connecting, make sure the power is off and all units are unplugged before making any connections.
• Connect the player to your TV directly. If you connect the player through a VCR, the playback picture will be distorted
because video discs are copy protected.
• If using a TV with a blue screen option, turn the option off, on the TV for best results.
• If you place the player near a tuner, the radio broadcast sound might be distorted. In this case, move the player away
from the tuner.
• When using this connection, a Blu-ray Disc with an LPCM audio soundtrack will be heard over the five channels.
Cables not included
5.1-Channel Amplifier with built-in decoder