Memorex Digital Video Disc Player - Manual (Page 22)

22
SETUP MENU (CONTINUED)
Use this option to turn the PCM down sampling On or Off.
Some amplifiers cannot support the high sampling rate of the
PCM signal. In this case, turn this option ON and the player
will output at 48kHz.
Select the Audio menu as shown on the previous page. Select
PCM DOWN SAMPLING using the Navigation (π,†) buttons
1
, then press the Navigation (®) button 1; “ON” and “OFF’
will appear. Select ON to turn on this option or OFF to turn off
this option using the Navigation (π,†) buttons 1, then press
the ENTER button 2.
NOTE: Even when PCM down sampling is set to OFF, some
discs will show output down sampled audio through the
coaxial and optical digital outputs.
OPEN/CLOSE
REPEAT
ANGLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH VOL
2ND
SUBTITLE
CLEAR
ZOOM
P O P- UP
ME NU RET
UR
N
TO
P M ENU DIS
PL AY
AUDIO
A B C D
SETUP
MUTE
POWER
2
1
1
Use this option to turn the Dynamic Compression On or Off.
Dynamic Compression reduces the gap between the loudest
and softest sounds. This means you can listen at lower levels.
Select the Audio menu as shown on the previous page.
Select Dynamic Compression using the Navigation (π,†)
buttons 1, then press the Navigation (®) button 1; “ON” and
“OFF’ will appear. Select ON to turn on this option or OFF to
turn off this option using the Navigation (π,†) buttons 1, then
press the ENTER button 2.
NOTE: This option is effective only when the soundtrack is
encoded as Dolby Digital.
OPEN/CLOSE
REPEAT
ANGLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH VOL
2ND
SUBTITLE
CLEAR
ZOOM
P O P- UP
ME NU RET
UR
N
TO
P M ENU DIS
PL AY
AUDIO
A B C D
SETUP
MUTE
POWER
2
1
1
PCM DOWN SAMPLING
Use this option to turn on a speaker and to set the speaker
distances from the user.
Select the Audio menu as shown on the previous page. Select
Speaker using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; the Speaker options will
appear. Select one of the speakers ({C} Center, {FL/FR}
Left/Right, {LS/RS} Surround Left/Surround Right, {Rls/Rrs}
Back Left/Back Right, {lfe} Lower Frequency Effect) using
the Navigation (π,†) buttons 1, then press the ENTER
button 2 to select. Press ENTER button again 2 to disable
this function or use Navigation (π,†) buttons 1 to highlight
different speaker setting option. Adjust the distance from the
desired seating area using the Navigation (√,®) buttons 1.
When done, press the RETURN button 3.
OPEN/CLOSE
REPEAT
ANGLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH VOL
2ND
SUBTITLE
CLEAR
ZOOM
P O P- UP
ME
NU RET
UR
N
TO
P M ENU
DIS
PL
AY
AUDIO
A B C D
SETUP
MUTE
POWER
2
1
3
1
SPEAKER
After correctly positioning the speakers, perform this Tone Test
and adjust the volume controls until the desired sound is
achieved.
Select the Audio menu as shown on the previous page. Select
Test Tone using the Navigation (π,†) buttons 1, then press
the Navigation (®) button 1; the Test Tone options will
appear. Select one of the speakers ({C} Center, {FL/FR}
Left/Right, {LS/RS} Surround Left/Surround Right, {Rls/Rrs}
Back Left/Back Right, {lfe} Lower Frequency Effect) using
the Navigation (π,†) buttons 1, then press the ENTER
button 2 to select. Select one of the speakers and then
press the ENTER button 2 again to emit a test tone to the
selected speaker. When done, press the RETURN button 3.
OPEN/CLOSE
REPEAT
ANGLE
AUDIO
ENTER
SLOW STOP PLAY PAUSE
PREV NEXT F.F REW
PIP
HOME
BD PLAYER
USB
SEARCH VOL
2ND
SUBTITLE
CLEAR
ZOOM
P O P- UP
ME NU RET
UR
N
TO
P M ENU DIS
PL
AY
AUDIO
A B C D
SETUP
MUTE
POWER
2
1
3
1
TEST TONE
DYNAMIC COMPRESSION
NOTES:
• Press the SETUP button to exit the Setup menus.
• Press the RETURN button to return to the previous setting.
• For the Speaker and Test Tone setting, please refer to unit connection pages 10 - 15.